Filter
Top Products
Chapter 12 Maintenance
WiMAX Device Configuration User’s Guide
180
Daytime
A network protocol used by devices for debugging and time measurement. A computer can use this
protocol to set its internal clock but only if it knows in which order the year, month, and day are
returned by the server. Not all servers use the same format.
Time
A network protocol for retrieving the current time from a server. The computer issuing the
command compares the time on its clock to the information returned by the server, adjusts itself
automatically for time zone differences, then calculates the difference and corrects itself if there
has been any temporal drift.
NTP
NTP stands for Network Time Protocol. It is employed by devices connected to the Internet in order
to obtain a precise time setting from an official time server. These time servers are accurate to
within 200 microseconds.
12.2 Password
Use this screen to set up admin and guest accounts for logging into and managing the WiMAX
Device. The “admin” user can access and configure all screens. The “guest” user can only perform
some basic settings such as viewing the system status information, configuring LAN, NAT, DDNS,
and Firewall settings and reset the WiMAX Device to factory defaults and restart the WiMAX Device.
Click Maintenance > Password to open this screen as shown next.
Figure 105 Password Screen
This screen contains the following fields:
Table 81 Password
LABEL DESCRIPTION
Group Select the group for which you want to change the login password.
Old Password Enter the old password for the login group.
New Password Enter the new password for the login group.
Retype Retype the new password for the login group.