Filter
Top Products
WiMAX Device Configuration User’s Guide 35
CHAPTER 4
Tutorials
4.1 Overview
Run the Setup Wizard for the basic setup of your WiMAX Device. This chapter shows you how to
configure some of the advanced settings WiMAX Device’s features.
Note: Be sure to read Introduction to the Web Configurator on page 20 before working
through the tutorials presented here. For field descriptions for individual screens,
see the related technical reference in this User's Guide.
This chapter includes the following configuration examples:
• WiMAX Connection Settings on page 35
• Setting Up a Small Network for the LAN on page 36
• Making a Telephone Call Over the Internet on page 38
• Blocking Web Access from the WiMAX Device on page 40
• Restricting Wireless Access to the WiMAX Device on page 40
• Allowing Internet Users to use Internal Servers, see page 42
• Access the WiMAX Device with a Domain Name, see page 44
• Configuring Static Route for Routing to Another Network, see page 46
• Remotely Managing Your WiMAX Device on page 48
• Changing Certificate to Communicate with Other Networks on page 49
• Using Virtual Networks on page 50
4.2 WiMAX Connection Settings
This tutorial provides you with pointers for configuring the WiMAX Device to connect to an ISP.
1 Connect the WiMAX Device to the ISP’s nearest base station. See Section 6.2 on page 70.
2 Configure the WiMAX Device’s broadcast frequency. Section 6.3 on page 72.
3 Configure the WiMAX Device to connect securely to the ISP’s authentication servers. See Section
6.4 on page 74.
4 Check the WiMAX Device’s connection status to ensure everything is working properly. See Section
6.11 on page 87.