Filter
Top Products
Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
58
2 Next, configure the Name, VID and Ports for the Filter Setting. Interfaces LAN1 and WiMAX
are Trunk links. On the WiMAX interface, the WiMAX Device will recognize VLAN 5 tagged packets it
receives from the VLAN supporting switch. VLAN tagged packets will also be forwarded out of this
interface. On the LAN1 interface, the WiMAX Device will tag packets it receives so that they are
recognized in VLAN 5. On LAN1, tagged packets will be untagged when they are forwarded out
since PC A does not support VLAN tagged packets. Interface IAD is configured as an Access port,
so tagged packets will be untagged when they are forwarded.
4.12.5 Scenario 5
In this scenario, PC A is directly connected to interface LAN1 on the WiMAX Device. PC B is on VLAN
5 while PC C is on VLAN 10. PC B is connected to interface WiMAX and interface IAD for managing
the WiMAX Device, through VLAN supporting switch S1. PC C is connected to interface WiMAX
through VLAN supporting switch S1.