Filter
Top Products
Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
56
2 Next, configure the Name, VID and Ports for the Filter Setting. Interfaces LAN1 and WiMAX
are Trunk links, so the WiMAX Device will recognize VLAN 5 and VLAN 10 tagged packets it receives
on these interfaces from the VLAN supporting switches. VLAN tagged packets will also be forwarded
out of these interfaces. Interface IAD is configured as an Access port, so tagged packets will be
untagged when they are forwarded.
4.12.4 Scenario 4
In this scenario, PC A is connected directly to interface LAN1 on the WiMAX Device, while PC B is on
VLAN 5. PC B is connected to interface WiMAX and interface IAD for managing the WiMAX Device,
through VLAN supporting switch S1.