Filter
Top Products
Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
52
1 Configure the Link Type, PVID and Tag/Untag settings for the interfaces as below by clicking
each row. Then press OK.
2 Next, configure the Name, VID and Ports for the Filter Setting. The WiMAX Device will tag
packets it receives on each interface so that they are recognized in VLAN 5. Tagged packets will be
untagged when they are forwarded out of each interface since the devices attached to these
interfaces do not support VLAN tagged packets.
4.12.2 Scenario 2
In this scenario, PC A and PC C are on VLAN 5, while PC B and PC D are on VLAN 10. PC A and PC B
are connected to interface LAN1 through VLAN supporting switch S1. PC C is connected to interface
WiMAX and interface IAD for managing the WiMAX Device, through VLAN supporting switch S2. PC
D is connected to interface WiMAX through VLAN supporting switch S2.