Filter
Top Products
Chapter 7 Network Setting
WiMAX Device Configuration User’s Guide
121
7.21 DDNS
Use this page to configure the WiMAX Device as a dynamic DNS client.
Priority Enter a priority level (1~7) that the WiMAX Device assigns to packets belonging
to this VLAN. Enter “0” for no priority assigned.
CFI Select Yes if the CFI (Canonical Format Indicator) field in a received packet is
set to 1, indicating non-Canonical Format. In this case, the packet should not be
forwarded as it is to an untagged port.
Tag/Untag You can only select Tag if the port is configured as a Trunk or Hybrid port. The
WiMAX Device will receive and forward VLAN tagged packets. Untagged packets
will be tagged with the PVID.
If you select Untag the WiMAX Device will remove tags from tagged packets it
forwards out of the port. Untagged packets received will be forwarded. If the
port is an Access port, the WiMAX Device will add tags to untagged packets it
receives and drop tagged packets it receives. If the port is a Trunk port, the
WiMAX Device will add tags to untagged packets it receives and retag tagged
packets.
OK Click this to save the changes in the Port Setting section.
Filter Setting
# This is the index number of a filter.
Name This is the name of a filter rule.
VID This field displays the VLAN ID for the filter. Click this field to change the VLAN
ID.
Retag Priority Select Yes to retag the priority of a packet received on a Trunk or Hybrid port.
Priority
Number
If Retag Priority is enabled, specify the new priority level (1~7) to tag. Enter “0”
for no priority assigned.
Ports This field displays the ports included in the filter. Click this field to select which
ports to include.
Delete Click this button to remove an item from the list.
Add Click this button to add an item to the list.
OK Click this button to save any changes made to the list.
Save Click this to save the changes made.
Cancel Click this avoid any changes made from being saved to your configuration.
Table 46 VLAN (continued)
LABEL DESCRIPTION