ZyXEL Communications max208m Network Router User Manual


 
Chapter 12 Maintenance
WiMAX Device Configuration User’s Guide
178
The WiMAX Device sends traps to the SNMP manager when any of the following events occurs:
OMA-DM
When the WiMAX Device initiates communication with the server (often times at start up or after
the first time you turn it on), the server uploads commands, new files (if any), and other
information used by a service provider to customize the WiMAX Device’s features.
Device management works as follows:
1 The server (A) sends out the query (1) to the WiMAX Device (B).
2 The WiMAX Device responds by sending back its credentials (2), to which the server responds with
its credentials along with a string of management operations (3).
3 The client responds to the management operations (4), perhaps confirming file alterations or
confirming receipt of file uploads and so on.
4 The server disconnects from the WiMAX Device once all of its management operations have been
carried out.
Figure 103 OMA-DM Data Management
OMA-DM Authentication
In order to ensure the integrity of the connection between an OMA-DM server and the WiMAX
Device, communication between the two is encoded using one of three common algorithms. They
are not intended to be used in lieu of proper digital security, but instead as a means of transmitting
Table 80 SNMP Traps
TRAP #
TRAP NAME DESCRIPTION
0 coldStart (defined in RFC-1215) A trap is sent after booting (power on).
1 warmStart (defined in RFC-1215) A trap is sent after booting (software reboot).
4 authenticationFailure (defined in
RFC-1215)
A trap is sent to the manager when receiving any
SNMP get or set requirements with the wrong
community (password).
6 whyReboot A trap is sent with the reason of restart before
rebooting when the system is going to restart (warm
start).
6a For intentional reboot: A trap is sent with the message "System reboot by
user!" if reboot is done intentionally, (for example,
download new files, CI command "sys reboot", etc.).
6b For fatal error: A trap is sent with the message of the fatal code if
the system reboots because of fatal errors.
A
B
1
2
3
4