Filter
Top Products
Chapter 6 WiMAX
WiMAX Device Configuration User’s Guide
82
6.8 Home NSP Settings
On this screen, you can configure settings for the Home NSP. The Home NSP can authenticate and
authorize connections and may support roaming through relationships with other NSPs.
Click WiMAX > ND&S > Home NSP Settings to open this screen as shown next.
Figure 35 Home NSP Settings
This screen contains the following fields:
Table 19 Home NSP Settings
LABEL DESCRIPTION
NDS Option Settings
NDS Mode Select Enable to use NDS to establish connections to the Home NSP.
RAPL Policy Select Strict to only allow V-NSPs specified in the RAPL to be used for
establishing connections to the H-NSP.
Select Partially Flexible to allow the WiMAX Device to use V-NSPs not specified
in the RAPL to connect to the H-NSP. Before attempting V-NSPs not specified in
the RAPL the WiMAX Device will first try the V-NSPs specified in the RAPL to
connect to the H-NSP.
Select Flexible to allow the WiMAX Device to use any V-NSPs for establishing
connections to the H-NSP. V-NSPs specified in the RAPL will have the same
priority as V-NSPs not specified in the RAPL.
CAPL Policy Select Strict to only allow NAPs specified in the CAPL to be used for establishing
connections to the H-NSP.
Select Partially Flexible to allow the WiMAX Device to use NAPs not specified in
the CAPL to connect to the H-NSP. Before attempting NAPs not specified in the
CAPL the WiMAX Device will first try the NAPs specified in the CAPL to connect to
the H-NSP.
Select Flexible to allow the WiMAX Device to use any NAPs for establishing
connections to the H-NSP. NAPs specified in the CAPL will have the same priority
as NAPs not specified in the CAPL.
Home NSP Settings
NSP ID After clicking the entry in the NSP ID list, you can enter the NSP ID for the Home
NSP here in the format XX:XX:XX where X is a hexadecimal character. Only one
Home NSP can be entered.
OK Click this button to save any changes made to the list.