Filter
Top Products
Chapter 12 Maintenance
WiMAX Device Configuration User’s Guide
184
Click Maintenance > Remote MGMT > CWMP to open this screen as shown next.
Figure 110 CWMP Screen
This screen contains the following fields:
Table 86 CWMP
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
ACS Server URL Enter the URL or IP address of the auto-configuration server.
Bootstrap Enable Select this to enable bootstrap events.
ACS Username
Enter the user name sent when the WiMAX Device connects to the ACS and
which is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores
but spaces are not allowed.
ACS Password
Enter the password sent when the WiMAX Device connects to an ACS and which
is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores
but spaces are not allowed.
Periodical Inform
Enable
Select this to allow the WiMAX Device to periodically connect to the ACS and
check for configuration updates.
If you do not enable this feature then the WiMAX Device can only be updated
automatically when the ACS initiates contact with it and if you selected the
checkbox on this screen.
Periodical Inform
Interval
Enter the time interval (in seconds) at which the WiMAX Device connects to the
auto-configuration server.
Connection
Request
Username
Enter the connection request user name that the ACS must send to the WiMAX
Device when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores
but spaces are not allowed.
Note: This must be provided by the ACS administrator.