Filter
Top Products
Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
48
To configure a static route to route traffic from N1 to N2:
1 Click Network Setting > Route > Static Route.
2 Click Add to create a new route.
3 Configure the Edit Static Route screen using the following settings:
3a Enter 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
3b Enter 192.168.1.253 (R’s IP address on N1) in the IP Address field under Next Hop.
3a Click Save.
Now computer B should be able to receive traffic from computer A. You may need to additionally
configure R’s firewall settings to accept specific traffic to pass through.
4.10 Remotely Managing Your WiMAX Device
The remote management feature allows you to log into the device through the Internet.
Goal: Set up the WiMAX Device to allow management requests from the WAN (Internet).
See Also: Section 7.20 on page 119.
R’s IP address on N2 192.168.10.2
B 192.168.10.33
Table 10 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS