A SERVICE OF

logo

2. Slide the cover back in the direction of the arrow (2) about one inch, and then pull it out
away from the printer to remove it.
Figure 6-5.
Left cover removal
Left front cover removal
1. Remove left cover. See Left cover removal.
2. Open the front door and remove the transfer unit. See
Transfer unit removal.
3. Disconnect the control panel connector (1) and remove one screw (2). Cut the cable tie
that is connected around the cable ferrite bead (3) and the cable harness (4).
Figure 6-6.
Left front cover removal (1 of 3)
4. Remove the power switch rod (1) from the power switch button (2).
ENWW Covers 211