A SERVICE OF

logo

2. Remove five screws (1), remove the gear plate (2), and remove two gears (3).
Figure 6-104.
Drum motor removal (1 of 3)
3. Remove the face-down delivery assembly. See
Face-down delivery assembly removal.
4. Remove the laser/scanner assembly. See
Laser/scanner assembly removal.
5. Disconnect two connectors (1), remove two screws (2), and remove the developing
engaging sensor unit (3) located next to the drum motor (4).
Figure 6-105.
Drum motor removal (2 of 3)
272 Chapter 6 Removal and replacement ENWW