A SERVICE OF

logo

2. Remove one (1) screw and remove the sensor (2). Disconnect the connector (3) while
removing the sensor.
Figure 6-86.
Environmental sensor removal
Secondary transfer roller engaging sensor (PS16) removal
1. Remove the pick-up/feed assembly. See Pick-up/feed assembly removal.
2. Turn the assembly upside down.
3. Remove the cable (1) from the cable guides. Using one hand, gently push two claws (2)
apart. With your other hand, pull the sensor (3) out by holding the cable connector (4).
Disconnect the connector to remove the sensor.
Figure 6-87.
Secondary transfer roller engaging sensor removal
262 Chapter 6 Removal and replacement ENWW