A SERVICE OF

logo

Developing engaging drive assembly removal
1. Remove the laser/scanner assembly. See Laser/scanner assembly removal.
2. Disconnect one connector (1).
3. Remove two screws (2) and remove the developing engaging drive assembly (3).
Reinstallation tip
Gear (4) may come off during this disassembly. Make sure to replace it when
reassembling.
Figure 6-24.
Developing engaging drive assembly removal
Pick-up/feed assembly removal
1. Remove the right cover. See Right cover removal.
2. Open the front door and remove the transfer unit. See
Transfer unit removal.
3. Remove the print cartridges. See
Print cartridge removal.
ENWW Main Assemblies 225