A SERVICE OF

logo

3. Pull the face-down assembly out slightly, disconnect one connector (2) from the back,
and then remove the assembly (3).
Figure 6-21.
Face-down delivery assembly removal
Laser/scanner assembly removal
CAUTION
Do not disassemble the laser/scanner assembly. It is not adjustable.
Do not touch the lens on the front of the laser/scanner assembly when holding it.
1. Remove the face-down delivery assembly. See
Face-down delivery assembly removal.
2. Remove the exhaust fan (FAN1) assembly. See
Exhaust fan (FAN1) removal, step 9.
3. Remove one connector (1) from the left side of the laser/scanner assembly.
222 Chapter 6 Removal and replacement ENWW