A SERVICE OF

logo

5. Unhook two claws (1) and pull the paper sensor (2) out, disconnecting the connector (3)
once the sensor is pulled away from the assembly.
Figure 6-71.
Tray paper sensor removal (3 of 3)
Reinstallation tip
When reinstalling the sensor, connect the connector first then, install the sensor.
Registration paper sensor (PS4) removal
1. Remove the pick-up/feed assembly. See Pick-up/feed assembly removal.
2. Remove one screw (1) and remove the registration paper sensor holder (2).
Figure 6-72.
Registration paper sensor removal (1 of 2)
254 Chapter 6 Removal and replacement ENWW