A SERVICE OF

logo

5. Remove four screws (1).
Figure 6-108.
Developing motor removal (2 of 3)
6. Disconnect one connector (1) and remove the developing motor (2).
Figure 6-109.
Developing motor removal (3 of 3)
Primary transfer roller engaging motor (M5) removal
1. Remove the image drive assembly. See Image drive assembly removal.
CAUTION
It is important to refer to the image driver assembly removal procedure's "Reinstallation
notes" to ensure correct installation of this assembly. If reassembly is not performed
correctly, it can result in damage to the print cartridge drive pins, the image drive assembly
drive pins, and the swing guide mechanism.
2. Remove the right swing guide. See
Swing guide removal, right.
274 Chapter 6 Removal and replacement ENWW