A SERVICE OF

logo

8. Remove eight screws (1) from the printer's bottom plate (2) and remove the plate.
Figure 6-137.
Right Tray 2 guide removal (2 of 6)
9. Release the duplex guide pan by lifting up on the release lever (1), then swing the pan
(2) down. Observe the grounding spring (3) while swinging the pan down. The spring
should slide out of the slot (4).
Figure 6-138.
Right Tray 2 guide removal (3 of 6)
292 Chapter 6 Removal and replacement ENWW