A SERVICE OF

logo

2. Remove three springs (1) from inside, located under the left swing guide. (The left swing
guide is not shown for illustration purposes only.) Remove these springs carefully; they
are delicate and can be easily damaged.
Figure 6-133.
Developing contact assembly removal (1 of 3)
3. Remove the plastic cover (1) by pressing in on two tabs (2) and pulling the cover out of
the printer.
Figure 6-134.
Developing contact assembly removal (2 of 3)
4. Unhook the cables from the left side cable guides (1) on the contact assembly.
ENWW Miscellaneous parts 289