A SERVICE OF

logo

2. Remove one screw (1), disconnect one connector (2), and remove the Tray 1 pick-up
solenoid (3).
Figure 6-89.
Tray 1 pick-up solenoid removal
Tray 2 pick-up solenoid (SL2) removal
1. Remove the right cover. See Right cover removal.
2. Refer to the
Pick-up/feed assembly removal procedure, steps 4 and 6 through 10, and
remove the paper drive gear plate.
3. Remove two screws (1), disconnect one connector (2), and remove the cover plate (3).
Figure 6-90.
Tray 2 pick-up solenoid removal (1 of 2)
264 Chapter 6 Removal and replacement ENWW