A SERVICE OF

logo

9. Disconnect one connector (1), remove two screws (2), remove the clutch plate (3), and
remove the clutch (4).
Reinstallation tip
When reinstalling the clutch, insert the clutch onto the clutch shaft. Make sure that the
slotted tab on the clutch fits into the tab (6) on the clutch plate. Also, ensure that the
white shaft bushing (5), which is keyed, is correctly seated into the notch on the clutch
plate.
Figure 6-33.
Pick-up/feed assembly removal (5 of 13)
10. Disconnect three connectors (1).
11. Remove the cable (2) from the cable holders (3).
230 Chapter 6 Removal and replacement ENWW