A SERVICE OF

logo

Unpacking the printer
NOTE
Save all the packing materials in case you need to repack and transport the printer at a later
date.
WARNING!
The printer weighs approximately 33.5 kg (73.3 lbs). HP recommends having two or more
people lift or move the printer.
1. Prepare the location by selecting a sturdy, level surface in a well-ventilated, dust-free
area. Make sure there is enough space around the printer so that the air vents on the left
side and rear of the printer are not blocked.
CAUTION
Do not place the printer in direct sunlight or in an area that has abrupt temperature and
humidity changes.
Recommended ranges: 17° to 25°C (62.6° to 77°F) and 20 to 60 percent relative humidity.
NOTE
If the printer has an optional 500-sheet paper feeder, it is packaged on top of the printer. Lift
the 500-sheet paper feeder from the package, and place it in the prepared location.
50 Chapter 3 Installation and configuration ENWW