A SERVICE OF

logo

6. Push the swing guide (1) in as far as it will go.
Figure 6-55.
Right swing guide removal (3 of 4)
7. Remove one spring (1) and then pull the developing (drum) lock arm (2) off its shaft.
Figure 6-56.
Right swing guide removal (4 of 4)
8. Remove the right, front swing guide rail, see
Pick-up/feed assembly removal, step 24.
Make sure to remove the screw that secures the rail (screw (1) mentioned in step 19 of
the Pick-up/feed assembly removal procedure).
ENWW Main assembly parts 243