A SERVICE OF

logo

Rear cover removal
1. Release two claws on the right side of the rear cover by inserting a flat-blade
screwdriver into each claw location (1) and twist the screwdriver to release each claw,
then pull the cover out and to the right (2) to remove it.
Figure 6-13.
Rear cover removal
Lower rear door (rear output bin) removal
1. Open the lower rear door.
2. Press in on the left hinge (1) pushing towards the right to release the pin, then pull the
left side of the tray out and to the left (2) to remove it.
Figure 6-14.
Lower rear door removal
Reinstallation tip
Hold the tray at about a 45 degree angle when reinstalling it.
ENWW Covers 215