A SERVICE OF

logo

Tray 2 pick-up roller removal
1. Remove Tray 2.
2. Push the roller (1) in the direction of the arrow, then remove it by pulling the right side
out (2) first.
Figure 6-46.
Tray 2 pick-up roller removal
Tray 2 separation pad removal
1. Remove Tray 2.
2. Remove any paper from the tray.
3. Push the lifting plate (1) down.
4. Unhook two claws (2) by pressing in on them, then lift up on the separation pad (3) to
remove it.
Figure 6-47.
Tray 2 separation pad removal
Reinstallation tip
The separation pad contains a spring attached to the back side of the pad. This spring
must be removed and installed on the replacement pad.
238 Chapter 6 Removal and replacement ENWW