3. Remove four screws (1) and remove the PCB (2).
Figure 6-116.
DC controller PCB removal
Formatter PCB removal
The HP Color LaserJet 3500/3550 series printer and the HP Color LaserJet 3700 series
printer have different formatter PCBs and formatter enclosures. The removal procedure for
the PCB is different as described below.
NOTE
When the formatter PCB is replaced, in addition to replacing the PCB, a configuration
procedure must be performed. For information on this configuration, refer to Chapter 8,
Replacement parts configuration.
1. Remove the left front cover. See
Left front cover removal.
2. For the HP Color LaserJet 3500/3550 series printer, perform steps "a" and "b", below;
for the HP Color LaserJet 3700 series printer, perform steps "c" and "d", below:
ENWW Circuit Boards 279
