A SERVICE OF

logo

3. If the paper is not visible, turn the printer off.
4. Slide out the lower rear door (rear output bin) tray extender.
5. Remove the lower rear door (rear output bin) by lifting and pulling the right side of the
door while pressing the tab with the ridges on the left side of the door.
WARNING!
The fuser is hot! Wait ten minutes after turning the printer off before removing the fuser.
6. Place your thumbs on the blue ridges (near the warning label), and using your fingers,
pull up on the blue latches.
374 Chapter 7 Troubleshooting ENWW