A SERVICE OF

logo

3. Loosen the right printer Tray 2 guide. See Cassette (Tray 2) guide, right, removal
(HP 3500/3550).
Figure 6-79.
Reversed paper sensor removal (1 of 2)
4. Remove one connector (1), unhook two claws (2), and remove the sensor (3). In this
illustration below the Tray 2 right rail guide is shown attached but is loose, allowing you
to remove it to access the back side of the sensor to release the two claws from behind.
Figure 6-80.
Reversed paper sensor removal (2 of 2)
Duplex feed delivery paper sensor (PS10) removal (HP 3700
only)
1. Remove the feed guide. See Feed guide unit removal.
2. Disconnect one connector (1) and remove the cables from the cable guide. Lift up on the
claw (2), slide the cable guide/sensor holder assembly back (3), then lift it up to release it.
258 Chapter 6 Removal and replacement ENWW