Pick-up clutch (CL4) removal - 500-sheet feeder
1. Remove the right cover. See Right cover removal.
2. Disconnect one connector (1) and one spring (2).
3. Remove three screws (3) (look under the metal bracket for two of the three screws), and
remove the sheet metal bracket (4).
4. Remove the swing unit (5).
Figure 6-154.
500-Sheet paper feeder pick-up clutch removal
NOTE
The entire unit needs to be replaced for replacement of the pick-up clutch.
Pick-up solenoid (SL3) removal - 500-sheet feeder
1. Remove Tray 3.
2. Remove the right cover. See
Right cover removal.
3. Disconnect one connector (1), remove two screws (2), and remove the solenoid plate (3).
Figure 6-155.
500-Sheet paper feeder pick-up solenoid removal
4. Remove the one screw to remove the pick-up solenoid from the plate.
ENWW 500-Sheet paper feeder sensor/solenoid/motor/PCB 301
