Filter
Top Products
IP Address Configuration Commands 99
IP Address
Configuration
Commands
This section describes the commands you can use to configure and manage IP
Addressing on your Switch 4500.
display ip host Syntax
display ip host
View
All views
Parameter
None
Description
Use the display ip host command to display all host names and their
corresponding IP addresses.
Example
To display all host names and their corresponding IP addresses, type the following:
<4500>display ip host
The information displays in the following format:
Host Age Flags Address
My 0 static 1.1.1.1
Aa 0 static 2.2.2.4
display ip interface vlan Syntax
display ip interface interface-type interface-num
View
All views
Parameter
interface-type Enter the port type.
interface-num Enter the port number.
Related commands: interface
Description
Use the display ip interface command to view information on the specified
interface.
Example
To display information for VLAN-interface 1, enter the following:
<4500>display ip interface vlan-interface 1
The information displays in the following format:
Vlan-interface1 current state : DOWN