Filter
Top Products
316 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
View
All views
Parameter
None
Description
Use the display ftp-user command to display the parameters of current FTP
user. You can perform this command to examine the configuration after setting
FTP parameters.
Example
Show the configuration of FTP user parameters.
<4500>display ftp-user
% No ftp user
<4500>
ftp server Syntax
ftp server enable
undo ftp server
View
System view
Parameter
enable: Start FTP Server.
Description
■ Use the ftp server command to start FTP Server and enable FTP user logon.
■ Use the undo ftp server command to close FTP Server and disable FTP user
logon.
By default, FTP Server is shut down.
Perform this command to easily start or shut down FTP Server, preventing the
Switch from being attacked by an unknown user.
Example
Shut down FTP Server.
<4500>sys
System View: return to User View with Ctrl+Z.
[4500]undo ftp server
% Close FTP server
[4500]
ftp timeout Syntax
ftp timeout minute
undo ftp timeout