Filter
Top Products
QoS Configuration Commands List 191
Related commands: mirroring-port, monitor-port.
Example
To display the port mirroring configuration, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z
[4500] display mirror
display qos
cos-local-precedence-
map
Syntax
display qos cos-local-precedence-map
View
All views
Parameter
None
Description
Use the display qos cos-local-precedence-map command to view COS and
Local-precedence map.
Example
Display COS and Local-precedence map.
<4500>display qos cos-local-precedence-map
cos-local-precedence-map:
802.1p & local precedence : 0 1 2 3 4 5 6 7
--------------------------------------------------------------------
queue: 2 0 1 3 4 5 6 7
display qos-interface all Syntax
display qos-interface { interface-name | interface-type
interface-num | unit-id } all
View
All views
Parameter
interface-name | interface-type interface-num: Interfaces of the Switch.
For more information, refer to the
port command in this guide.
unit-id: Unit ID of the Switch.
Description
Using the display qos-interface { interface-name | interface-type
interface-num | unit-id } all
command, you can view QoS information of all
interfaces. If you do not input interface parameters, this command will display all
QoS setting information for the Switch, including traffic policing, rate limit at
interface, and so on. If you input interface parameters, this command will display