Filter
Top Products
64 CHAPTER 2: USING PORT COMMANDS
Ethernet Port Link
Aggregation
Commands
This section describes the commands you can use to configure Ethernet Port LInk
Aggregation on the Switch.
debugging
link-aggregation error
Syntax
debugging link-aggregation error
undo debugging link-aggregation error
View
User View
Parameter
None
Description
Use the debugging link-aggregation error command to enable link
aggregation error debugging. Use the
undo debugging link-aggregation
error
command to disable link aggregation error debugging.
Example
To enable link aggregation error debugging, enter the following:
<4500>debugging link-aggregation error
debugging
link-aggregation event
Syntax
debugging link-aggregation event
undo debugging link-aggregation event
View
User View
Parameter
None
Description
Use the debugging link-aggregation event command to enable link
aggregation events debugging. Use the
undo debugging link-aggregation
event
command to disable link aggregation events debugging.
Example
To enable link aggregation events debugging, enter the following:
<4500>debugging link-aggregation event
debugging lacp packet Syntax
debugging lacp packet [ interface { interface_type interface_number
| interface_name } [ to { interface_type interface_num |
interface_name } ] ]