Filter
Top Products
IP Performance Configuration Commands 125
Description
Use the display icmp statistics command to view the statistics information
about ICMP packets.
Related commands: display ip interface vlan-interface, reset ip
statistics
.
Example
To view statistics about ICMP packets, enter the following:
<4500> display icmp statistics
Input: bad formats 0 bad checksum 0
echo 5 destination unreachable 0
source quench 0 redirects 0
echo reply 10 parameter problem 0
timestamp 0 information request 0
mask requests 0 mask replies 0
time exceeded 0
Output:echo 10 destination unreachable 0
source quench 0 redirects 0
echo reply 5 parameter problem 0
timestamp 0 information reply 0
mask requests 0 mask replies 0
time exceeded 0
display ip socket Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Parameters
sock-type Enter the type of a socket: (tcp:1, udp 2, raw ip 3).
Table 13 Output Description of the display icmp statistics Command
Field Description
bad formats Number of input packets in bad format
bad checksum Number of input packets with wrong checksum
echo Number of input/output echo request packets
destination unreachable Number of input/output packets with unreachable destination
source quench Number of input/output source quench packets
redirects Number of input/output redirected packets
echo reply Number of input/output echo reply packets
parameter problem Number of input/output packets with parameter problem
timestamp Number of input/output timestamp packets
information request Number of input information request packets
mask requests Number of input/output mask request packets
mask replies Number of input/output mask reply packets
information reply Number of output information reply packets
time exceeded Number of time exceeded packets