Filter
Top Products
248 CHAPTER 11: USING AAA AND RADIUS COMMANDS
Description
Use the debugging mac-authentication event command to enable centralized
MAC address authentication event debugging. Use the
undo debugging
mac-authentication event
command to disable event debugging.
Example
To enable centralized MAC address authentication event debugging, enter the
following:
<4500>debugging mac-authentication event
display
mac-authentication
Syntax
display mac-authentication [ interface interface-list ]
View
Any view
Parameter
interface interface-list: Ethernet interface list including several Ethernet
interfaces, expressed in the format
interface-list = { interface-num [ to
interface-num ] } & < 1-10 >
. interface-num specifies a single Ethernet
interface in the format
interface-num = { interface-type interface-num |
interface-name }
, where interface-type specifies the interface type,
interface-num specifies the interface number and interface-name specifies the
interface name. For the respective meanings and value ranges, see the parameters
in the Port Command chapter.
Description
Use the display mac-authentication command to display the global
information on centralized MAC address authentication, including centralized
MAC address authentication features, value of each current timer, number of
online users, the MAC address in silent periods, and the authentication status of
the MAC address on each interface.
Example
Display the global information of centralized MAC address authentication
<4500>display mac-authentication
mac address authentication is Enabled.
authentication mode is UsernameAsMacAddress
the Fixed username is mac
the Fixed password is NULL
offline detect period is 300s
quiet period is 1 minute
server response timeout value is 100s
max allowed user number is 1024
current user number amounts to 0
current domain:
Silent Mac User info:
MAC ADDR From Port Port Index
Ethernet1/0/1 is link-up
MAC address authentication is Disabled
Authenticate success: 0, failed: 0
Current online user number is 0