Filter
Top Products
56 CHAPTER 2: USING PORT COMMANDS
[4500-Ethernet1/0/1]multicast-suppression 20
[4500-Ethernet1/0/1]
Specify the maximum packets per second of the multicast traffic on an
Ethernet1/0/1 as 1000 Mpps.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]interface ethernet 1/0/1
[4500-Ethernet1/0/1]multicast-suppression pps 1000
[4500-Ethernet1/0/1]
port access vlan Syntax
port access vlan vlan_id
undo port access vlan
View
Ethernet Port View
Parameter
vlan_id: Enter a VLAN ID in the range 2 to 4094, as defined in IEEE 802.1Q.
Description
■ Use the port access vlan command to assign the access port to a specified
VLAN.
■ Use the undo port access vlan command to remove the access port from
the VLAN.
Example
To assign Ethernet port 1/0/1 to VLAN3, enter the following.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]vlan 3
[4500-vlan3]quit
[4500]interface ethernet 1/0/1
[4500-Ethernet1/0/1]port access vlan 3
[4500-Ethernet1/0/1]
port hybrid pvid vlan Syntax
port hybrid pvid vlan vlan_id
undo port hybrid pvid
View
Ethernet Port View
Parameter
vlan_id: Enter a VLAN ID in the range 2 to 4094, as defined in IEEE 802.1Q. The
default is 1.