Filter
Top Products
364 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Parameter
None
Description
Use the info-center enable command to enable the system log function. Use
the
undo info-center enable command to disable system log function.
By default, system log function is enabled.
Only after the system log function is enabled can the system output the log
information to the info-center loghost and console, etc.
For the related commands, see info-center loghost, info-center logbuffer,
info-center console channel, info-center monitor channel, display
info-center
.
Example
Enable the system log function.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]info-center enable
% Information center is enabled
[SW4500]
info-center logbuffer Syntax
info-center logbuffer [ channel { channel-number | channel-name } |
size buffersize ]
undo info-center logbuffer [ channel | size ]
View
System view
Parameter
channel: Configure the channel to output information to buffer.
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name. The name can be channel6,
channel7, channel8, channel9, console, logbuffer, loghost, monitor,
snmpagent, trapbuffer.
size: Configure the size of buffer.
buffersize: Size of buffer (number of messages which can be kept); The default
size of the buffer is 512.
Description
Use the info-center logbuffer command to configure to output information
to the memory buffer. Use the
undo info-center logbuffer command to
cancel the information output to buffer