Filter
Top Products
310 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
interface Ethernet1/0/6
interface Ethernet1/0/7
interface Ethernet1/0/8
interface Ethernet1/0/9
interface Ethernet1/0/10
interface Ethernet1/0/11
interface Ethernet1/0/12
---- More ----
To view configuration information beginning with “user”, enter the following:
<4500>display current-configuration | include ^user
user-interface aux 0 7
user-interface vty 0 4
To view the pre-positive and post-positive configuration information, enter the
following:
<4500>display current-configuration configuration
local-server nas-ip 127.0.0.1 key 3com
domain default enable system
queue-scheduler wrr 1 2 3 4 5 9 13 15
ip http acl 2000
radius scheme system
domain system
acl number 2000 match-order auto
rule 0 permit
acl number 3000
acl number 4000
rule 0 permit
qos-profile student
packet-filter inbound ip-group 2000 rule 0
---- More ----
display
saved-configuration
Syntax
display saved-configuration [ unit unit-id ]
View
All views
Parameter
unit unit-id: Specify the Unit ID of switch.
Description
Use the display saved-configuration command to view the configuration files
in the flash memory of the Switch.
If the Switch works abnormally after power on, execute the display
saved-configuration
command to view the startup configuration of the Switch.
Related commands: save, reset saved-configuration, display
current-configuration
.
Example
To display configuration files in flash memory of the Switch, enter the following: