Filter
Top Products
346 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Basic System
Configuration and
Management
Commands
This section describes the basic system configuration and system management
commands available on your Switch 4500.
clock datetime Syntax
clock datetime time date
View
User view
Parameters
time : Enter the current time in HH:MM:SS format . HH can be in the range 0 to
23.
MM and SS can be in the range 0 to 59.
date : Enter the current year in MM/DD/YYYY or YYYY/MM/DD format . YYYY can be
in the range 2000 to 2099.
MM can be in the range 1 to 12. DD can be in the range
1 to 31.
Description
Use the clock datetime command to set the current system time and date. The
default is 23:55:52, 2000/4/1.
Related command: display clock
Example
To set the system time and date to 09:30:00, 2004/1/1, enter the following:
<SW4500>clock datetime 09:30:00 2004/01/01
clock summer-time Syntax
clock summer-time zone_name { one-off | repeating } start_time
start_date end_time end_date offset_time
undo clock summer-time
View
User view
Parameters
zone_name: Enter the name of the summer time zone, up to 32 characters in
length.
one-off: Specifies that the summer time is set for the selected year.
repeating: Specifies that the summer time is set for every year, starting from the
selected year.
start_time: Enter the start time of summer time, in the format HH:MM:SS.
start_date: Enter the start date of summer time, in the format YYYY/MM/DD.