Filter
Top Products
IP Routing Policy Configuration Commands 169
By default, no match sub-statement is defined.
Related commands: if-match interface, if-match acl, if-match ip-prefix,
if-match ip next-hop, if-match tag, route-policy, apply ip next-hop,
apply local-preference, apply cost, apply origin
and apply tag.
Example
A match sub-statement is defined, which allows the routing information with
routing cost 8 to pass this match sub-statement.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]route-policy permit node 1
% New sequence of this list
[4500-route-policy]if-match cost 8
if-match interface Syntax
if-match interface { interface_name | interface_type
interface_number }
undo if-match interface
View
Route policy view
Parameter
interface_type Enter interface type.
interface_number Enter interface number.
interface_name Enter interface name.
Description
Use the if-match interface command to match the route whose next hop is the
designated interface.
Use the undo if-match interface command to cancel the setting of matching
condition.
By default, no match sub-statement is defined.
Related command: if-match acl, if-match ip-prefix, if-match ip
next-hop
, if-match cost, route-policy, apply cost.
Example
Define one match sub-statement to match the route whose next hop interface is
Vlan-interface 1.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]route-policy permit node 1
% New sequence of this list
[4500-route-policy]if-match interface Vlan-interface 1