Filter
Top Products
Stack Commands 211
Unit 3 saved unit ID successfully.
Unit 4 saved unit ID successfully.
Unit 5 saved unit ID successfully.
Unit 6 saved unit ID successfully.
Unit 7 saved unit ID successfully.
Unit 8 saved unit ID successfully.
<4500>display ftm topology-database
Total number of UNITs in fabric : 8, My CPU ID : 4
UID CPU-Mac Prio stacking-port Chips Mid Pid A/M
1 00e0-fc00-5502 5 UP/DOWN 2 0/1 3 M
4 00e0-fc03-5502 5 UP/DOWN 2 6/7 3 M
3 00e0-fc04-5502 5 UP/DOWN 2 4/5 3 M
6 00e0-fc05-5502 5 UP/DOWN 2 10/11 3 M
5 00e0-fc06-5502 5 UP/DOWN 2 8/9 3 M
2 00e0-fc07-5502 5 UP/DOWN 2 2/3 3 M
7 00e0-fc04-6502 5 UP/DOWN 2 12/13 3 M
8 00e0-fc01-5502 5 UP/DOWN 2 14/15 5 M
fabric-port enable Syntax
fabric-port { interface-type interface-num } enable
undo fabric-port { interface-type interface-num } enable
View
System View
Parameter
interface-type interface-num Displays the interface type and number
Description
Use the fabric-port enable command to specify the Fabric port of the Switch.
Use the undo fabric-port enable command to cancel the Fabric port of the
Switch.
Example
To set GigabitEthernet1/0/51 to stacking port mode, enter the following:
[4500]fabric-port gigabitEthernet1/0/51 enable
ftm stacking-vlan Syntax
ftm stacking-vlan vlan-id
undo ftm stacking-vlan
View
System View
Parameter
vlan-id: Specifies the VLAN used for stacking. By default, the stacking VLAN is
VLAN 4093.