Filter
Top Products
164 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS
summarization all the time. If RIP-2 is used, route summarization function can be
disabled with the
undo summary command, when it is necessary to broadcast the
subnet route.
Related command: rip version
Example
To set the RIP version on the interface Vlan-interface 1 to RIP-2, and then disable
the route aggregation, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]interface Vlan-interface 1
[4500-Vlan-interface1]rip version 2
[4500-Vlan-interface1]quit
[4500]rip
[4500-rip]undo summary
timers Syntax
timers { update update-timer-length | timeout timeout-timer-length }
*
undo timers { update | timeout } *
View
RIP View
Parameters
update-timer-length Enter the value of the period update timer, ranging from 1
to 3600 seconds. The default value is 30 seconds.
timeout-timer-length Enter the value of the timeout timer, ranging from 1 to
3600 seconds. The default value is 180 seconds.
Description
Use the timers command to modify the values of the three RIP timers: period
update, timeout, and garbage-collection.
Use the undo timers command to restore the default settings.
By default, the values of period update, timeout, and garbage-collection timers
are 30 seconds, 180 seconds, and 120 seconds, respectively.
Generally, the value of the garbage-collection timer is fixed to 4 times the value of
the period update timer. Adjusting the period update timer will affect the
garbage-collection timer.
The modification of RIP timers takes effect immediately.
Related Command: display rip