Filter
Top Products
458 APPENDIX A: BOOTROM INTERFACE
Free Space: 10460160 bytes
The current application file is s4b03_01_04s168.app
(*)-with main attribute;(b)-with backup attribute
(*b)-with both main and backup attribute
Please input the file number to delete:
The current application file is name and an * indicates the file in the list.
If the filename is in brackets, for example [test.cfg], this indicates that the file
has been deleted from the CLI but is still present in the recycle-bin.
Modify Bootrom
Password
Select Option 5 at the prompt to allow the bootrom access password to be
changed as follows:
Old password:
New password: XXXX
Confirm password: XXXX
Current password has been changed successfully!
Enter Bootrom Upgrade
Menu
Select Option 6 at the prompt to allow a bootrom file to be downloaded to Flash
and then automatically upgrade the bootrom to the new version as follows:
Bootrom update menu:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
For further information on downloading see “Boot Menu File Download
Commands” on page 459.
Skip Current
Configuration File
Select Option 7 at the prompt to allow the Switch to be rebooted without loading
the current configurations as follows:
The current setting is running configuration file when reboot.
Are you sure to skip current configuration file when reboot?
Yes or No(Y/N)
The Switch will reboot using the factory defaults.
Set Bootrom Password
Recovery
Enter Option 8 at the prompt to allow the bootrom super password to be disabled
or enabled. The following is displayed:
Warning: if disable the bootrom password recovery, the super
password based on switch mac address is invalid!
The current mode is enable bootrom password recovery.
4 576218 s4h03_04.web
5 10301 3comoscfg.def
6 10369 3comoscfg.cfg
7 10369 [test.cfg]
File Number
File
Size(bytes)
File Name