Filter
Top Products
Stack Commands 209
2 00e0-fc03-5502 10 UP/DOWN 2 2/3 3 A
3 00e0-fc04-5502 10 UP/DOWN 2 4/5 3 A
6 00e0-fc05-5502 10 UP/DOWN 2 10/11 3 A
5 00e0-fc06-5502 10 UP/DOWN 2 8/9 3 A
4 00e0-fc07-5502 5 UP/DOWN 2 6/7 3 M
7 00e0-fc04-6502 10 UP/DOWN 2 12/13 3 A
8 00e0-fc01-5502 10 UP/DOWN 2 14/15 5 A
display ftm Syntax
display ftm { information | route | topology-database }
View
Any view
Parameter
information: Displays the FTM protocol information.
route: Displays the MAC forwarding table of the fabric.
topology-database: Displays the topology database information of the fabric.
Description
Use the display ftm information command to view the FTM protocol
information, including DDP status, unit ID, fabric link status, stacking port status
and DDp packet statistics.
Use the display ftm route command to view the MAC forwarding table of the
fabric, which is stored in the CPU.
Use the display ftm topology-database command to view the topology
database information of the fabric.
Example
To display the FTM protocol information of the Switch, enter the following:
[4500]display ftm information
DDP Protocol : disabled
stacking VLAN : NONE
stacking Auth : NONE
display xrn-fabric Syntax
display xrn-fabric [ port ]
View
Any view
Parameter
port: display the stacking port information.
Description
Use the display xrn-fabric command to view the information of the entire
stack, including unit ID, unit name, operation mode. If the stack information is