Filter
Top Products
Network Connection Test Commands 359
Syntax
remote-ping-agent enable
undo remote-ping-agent enable
Parameters
None
Example
Enable remote-ping client.
[S5500] remote-ping-agent enable
View
This command can be used in the following views:
■ System view
Description
You can perform a test only after the remote-ping client function is enabled.
tracert Syntax
tracert [[ -a source-ip] -f first-TTL ] [ -m max-TTL ] [ -p port ] [
-q nqueries ] [ -w timeout ] string
View
All views
Parameter
-a source-IP: Configure the source IP address used by tracert command.
-f: Configure to verify the -f switch, first-TTL specifies an initial TTL, ranging
from 0 to the maximum TTL.
-m: Configure to verify the -m switch, max-TTL specifies a maximum TTL larger
than the initial TTL.
-p: Configure to verify the -p switch, port is an integer host port number.
Generally, user need not modify this option.
-q: Configure to verify the -q switch, nqueries is an integer specifying the
number of query packets sent, larger than 0.
-w: Configure to verify the -w switch, timeout is an integer specifying IP packet
timeout in seconds, larger than 0.
string: IP address of the destination host or the hostname of the remote system.