Filter
Top Products
Ethernet Port Configuration Commands 57
Description
Use the port hybrid pvid vlan command to configure the default VLAN ID of
the hybrid port. Use the
undo port hybrid pvid command to restore the default
VLAN ID of the hybrid port.
Hybrid port can be configured together with the isolate-user-vlan. But if the
default VLAN has set mapping in the isolate-user-vlan, the default VLAN ID cannot
be modified. If you want to modify it, cancel the mapping first.
The default VLAN ID of local hybrid port must be consistent with that of the peer
one, otherwise, the packets cannot be properly transmitted.
Related command: port link-type.
Example
To configure the default VLAN of the hybrid port Ethernet1/0/1 to VLAN100, enter
the following.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]interface ethernet 1/0/1
[4500-Ethernet1/0/1]port link-type hybrid
[4500-Ethernet1/0/1]port hybrid pvid vlan 100
[4500-Ethernet1/0/1]
port hybrid vlan Syntax
port hybrid vlan vlan_id_list { tagged | untagged }
undo port hybrid vlan vlan_id_list
View
Ethernet Port View
Parameter
vlan_id_list: Enter a VLAN ID, or more than one VLAN ID, in the range 2 to
4094
. The hybrid port will be added to the specified VLANs. This can be a single
VLAN, a series of individual VLANs separated by a space, or the first VLAN in a
range of VLANs (
vlan_id to last_vlan_id).
You can enter up to ten vlan_id parameters in one port hybrid vlan
command.
tagged: Enter to tag the port for the specified VLAN.
untagged: Enter to leave the port untagged for the specified VLAN.
Description
Use the port hybrid vlan command to add the port to the specified VLAN(s).
The port needs to have been made a hybrid port before you can do this. See the
related command below. Use the
undo port hybrid vlan command to remove
the port from the specified VLAN(s).