Filter
Top Products
RADIUS Protocol Configuration Commands 285
For detailed information, read the Description of the primary accounting
command.
Related commands: key, radius scheme, state.
Example
To set the IP address of the second accounting server of RADIUS scheme, 3Com, to
10.110.1.1 and the UDP port 1813 to provide RADIUS accounting service, enter
the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]radius scheme 3Com
[4500-radius-3Com]secondary accounting 10.110.1.1 1813
secondary
authentication
Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
RADIUS Scheme View
Parameter
ip-address: IP address, in dotted decimal format. By default, the IP addresses of
second authentication/authorization is at 0.0.0.0.
port-number: Specifies the UDP port number, ranging from 1 to 65535. By
default, the authentication/authorization service is provided via UDP 1812
Description
Use the secondary authentication command to configure the IP address and
port number for the second RADIUS authentication/authorization. Use the
undo
secondary authentication
command to restore the IP address and port number
to default values.
For detailed information, read the Description of the primary authentication
command.
Related commands: key, radius scheme, state.
Example
To set the IP address of the second authentication/authorization server of RADIUS
scheme, “3Com”, to 10.110.1.2 and the UDP port 1812 to provide RADIUS
authentication/authorization service, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]radius scheme 3Com
[4500-radius-3Com]secondary authentication 10.110.1.2 1812
server-type Syntax
server-type { 3com | standard }