Filter
Top Products
SNMP Configuration Commands 387
Example
Set the size of SNMP packet to 1042 bytes.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]snmp-agent packet max-size 1042
[SW4500]
snmp-agent sys-info Syntax
snmp-agent sys-info { contact sysContact | location sysLocation |
version { { v1 | v2c | v3 } * | all } }
undo snmp-agent sys-info [ { contact | location }* | version { { v1 |
v2c | v3 }* | all } ]
View
System view
Parameter
sysContact: Specify a character string describing the system maintenance
contact (in bytes), with a length ranging from 1 to 255. The default contact
information is "3Com Marlborough USA".
sysLocation: Specify a character string to describe the system location. By
default, the character string is "Marlborough USA".
version: version of running SNMP.
v1: SNMP v1.
v2c: SNMP v2C.
v3: SNMP v3.
all: all SNMP version (includes SNMP v1, SNMP v2C, SNMP v3).
Description
Use the snmp-agent sys-info command to set system information such as
geographical location of the device, contact information for system maintenance
and version information of running SNMP. Use the
undo snmp-agent sys-info
location
command to restore the default value.
Example
Set system location as Building 3/Room 214.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]snmp-agent sys-info location Building 3/Room 214
[SW4500]
snmp-agent target-host Syntax
snmp-agent target-host trap address udp-domain host-addr [ udp-port
udp-port-number ] params securityname community-string [ v1 | v2c |
v3 [ authentication | privacy ] ]