Filter
Top Products
Configuration File Management Commands 311
<4500>display saved-configuration
local-server nas-ip 127.0.0.1 key 3com
domain default enable system
queue-scheduler wrr 1 2 3 4 5 9 13 15
ip http acl 2000
radius scheme system
domain system
acl number 2000 match-order auto
rule 0 permit
acl number 3000
acl number 4000
rule 0 permit
qos-profile student
---- More ----
display this Syntax
display this
View
All views
Parameter
None
Description
Use the display this command, to display the configuration of the current view.
If you need to authenticate whether the configurations are correct, after you have
finished a set of configurations under a view to use the
display this command
to view the parameters.
Some effective parameters are not displayed if they are the same as the default
ones. Some ineffective parameters that were configured by the user, are not
displayed either.
Associated configuration of the interface is displayed when executing the
command in different interface views, related configuration of the protocol view is
displayed when excecuting this command in different protocol views, and all the
configurations of the protocol views are displayed when executing this command
in protocol sub-views.
For the related command, see save, reset, saved-configuration, display
current-configuration, display saved-configuration
.
Example
Display the configuration parameters for the current view of the switch system.
<4500>sys
System View: return to User View with Ctrl+Z.
[4500]display this
return
[4500]