3Com 4500 50-PORT Switch User Manual


 
456 APPENDIX A: BOOTROM INTERFACE
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9): 1
Boot Menu The following section describes the various options available in the boot menu.
Download Application
File to Flash
This option enables you to download all files into flash. Enter 1 at the prompt to
display the following menu options:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
For further information on downloading see Boot Menu File Download
Commands” on page 459.
Select Application File to
Boot
Select Option 2 at the prompt to display the following:
Select application file to boot
1. set application files
2. set configuration files
3. set web files
0. return
Enter your choice(0-3):